0

je mandje is leeg

Go to shop »

We are showing you the Dutch version of our site: would you prefer a different location?

We are showing you the Dutch version of our site: would you prefer a different location?

Seat pack

Een gereedschapsetui is een belangrijk accessoire voor alle wielrenners. Dit klassieke exemplaar is gemaakt van waterdicht Cordura®, is voorzien van een stijlvolle tandwielprint en kan veilig worden vastgemaakt dankzij het leren bandje.

Seat Pack

€45.00

Bekijk maattabel »

Zet op verlanglijst

Klassiek wielergereedschapsetui gemaakt van kwalitatief hoogstaand materiaal

Een goede gereedschapsset is een essentieel accessoire voor alle wegwielrenners. Het Rapha Seat Pack is geïnspireerd door de klassieke vintage etuis en is verbeterd door het gebruik van duurzame moderne materialen. Het gereedschapsetui is ontworpen om gereedschappen mee te nemen tijdens lange trainingsritten, maar is ook ideaal voor dagelijkse ritten door de stad. Hij past makkelijk en veilig onder de zadelstangen dankzij het traditionele leren bandje.

LET OP: Het etui en het bandje moeten voor iedere rit gecontroleerd worden om te zorgen dat het zo veilig mogelijk vast zit.

_______________________________________________________

Seat Pack Folding Instructions:

The zipped pocket can store small emergency items such as patches or last-stand dope.

Roll tubes tightly, valves inside the roll, to the size of a fist, secure with tape or rubber bands.

As neatly as possible place the tube/ multi-tool/ tyre levers over the zipped pocket, with the weight central and evenly distributed, and fold the pin-stitched sides over the items.

From the zipped-pocket end, fold the edge over the items, and begin tightly rolling the pack towards the toe-strap end, keeping the pack compressed and sides folded in tightly.

Keeping the pack secure, place up under the saddle, with the black leather loop (with the white toe strap running through it, like the image shows below) facing the ground. Using any compression in the rolled-up tube, wedge the pack between the seat rails, as high and tight as possible inside the saddle.

Thread the end of the white toe-strap up and over both saddle rails, and through the buckle, taking care it’s threaded the correct way for the teeth to catch the leather strap.

Pull the strap tight to secure the seat pack in place and pass through the final section of the buckle and black leather loop (like shown in the above image)

Have a final check the pack is secure and held tightly and that the weight is central to the toe-strap, with the buckle correctly engaged.

- It’s like rolling anything, wherever you are in the world; a sleeping bag, bartape or a burrito. Make sure it’s all secure and neat.