Seat pack

Un accesorio vital para todo ciclista de carretera, esta funda enrollable para herramientas está fabricada con algodón impermeable, asegurado con una correa de cuero y adornado con un elegante estampado de un piñón.

Clásica funda enrollable para herramientas de ciclismo elaborada con tejidos de alto rendimiento

Una buena funda enrollable es un accesorio vital para el ciclista de carretera. La Seat Pack de Rapha está inspirada en la clásica funda enrollable, reinventada con resistentes tejidos modernos. Ha sido diseñada para transportar herramientas durante las largas rutas de entrenamiento, aunque también es ideal para el ciclismo urbano diario. Se almacena de forma discreta y segura debajo de los raíles del sillín, sujetándola con una tradicional cinta para puntera en piel.

Características principales:

• Impermeable
• Bordes en piel
• Banda en piel blanca con logotipo Rapha grabado
• Cierre cromado
• Bolsillo interior para objetos personales con cremallera y tirador con cierre
• Forro con estampado tipo rueda dentada

NOTA: La funda y la correa deben revisarse antes de cada ruta para garantizar que estén bien sujetas.

_______________________________________________________

Seat Pack Folding Instructions:

The zipped pocket can store small emergency items such as patches or last-stand dope.

Roll tubes tightly, valves inside the roll, to the size of a fist, secure with tape or rubber bands.

As neatly as possible place the tube/ multi-tool/ tyre levers over the zipped pocket, with the weight central and evenly distributed, and fold the pin-stitched sides over the items.

From the zipped-pocket end, fold the edge over the items, and begin tightly rolling the pack towards the toe-strap end, keeping the pack compressed and sides folded in tightly.

Keeping the pack secure, place up under the saddle, with the black leather loop (with the white toe strap running through it, like the image shows below) facing the ground. Using any compression in the rolled-up tube, wedge the pack between the seat rails, as high and tight as possible inside the saddle.

Thread the end of the white toe-strap up and over both saddle rails, and through the buckle, taking care it’s threaded the correct way for the teeth to catch the leather strap.

Pull the strap tight to secure the seat pack in place and pass through the final section of the buckle and black leather loop (like shown in the above image)

Have a final check the pack is secure and held tightly and that the weight is central to the toe-strap, with the buckle correctly engaged.

- It’s like rolling anything, wherever you are in the world; a sleeping bag, bartape or a burrito. Make sure it’s all secure and neat.